AlgoLaser 1064nm Infrared Laser Module for Steel Engraving
AlgoLaser 1064nm Infrared Laser Module Alpha MK2: Engrave Steel and Plastic with Precision for USA Makers
Do you possess a diode laser engraver but would like you could engrave metallic? Regular blue diode lasers (445nm) simply cannot mark bare metal. They call for Distinctive sprays or coatings. The AlgoLaser 1064nm Infrared Laser Module Alpha MK2 alterations every thing. This strong infrared laser module operates at 1064nm wavelength, enabling you to engrave straight on metals like stainless steel, aluminum, brass, and titanium. In addition, it performs on a lot of plastics, wood, along with other resources. For United states of america tiny business people, makers, and hobbyists, this module opens up a world of latest alternatives.
On this in depth guidebook, We are going to investigate everything you need to know about the
Main Unit | Compact and powerful
Side View | 1064nm wavelength
Mounted | Ready for metallic engraving
Engraving Sample | Stainless-steel outcome
Lens Detail | Precision optics
Metal Materials | Chrome steel, aluminum, brass, titanium
Online video Showcase: AlgoLaser 1064nm Infrared Laser Module Alpha MK2 in Action
Enjoy the video under to begin to see the infrared laser module engraving metallic, marking plastic, and generating superior-contrast final results.
Your browser would not support the online video tag. Check out the AlgoLaser 1064nm Infrared Laser Module Alpha MK2 in motion.
See the AlgoLaser 1064nm infrared module engraving chrome steel, aluminum, and dim plastics. Encounter the precision of 1064nm wavelength technological innovation.
H2: What Is the AlgoLaser 1064nm Infrared Laser Module Alpha MK2? A whole Overview
The AlgoLaser 1064nm Infrared Laser Module Alpha MK2 is really a higher-energy diode laser module that emits light at 1064 nanometers wavelength. This really is while in the infrared spectrum, invisible for the human eye. As opposed to normal blue diode lasers (445nm) that can't mark bare steel, the 1064nm wavelength is absorbed extremely well by metals. This enables direct engraving on chrome steel, aluminum, brass, copper, titanium, together with other metals with none pre-cure or marking spray.
The Alpha MK2 is created being an improve module for present laser engravers. It mounts for the gantry of your recent equipment, replacing the blue laser module. It connects towards your controller and power provide. Once set up, you can engrave metals, darkish plastics, anodized aluminum, and all kinds of other components which were Beforehand not possible that has a diode laser. For United states makers, this module transforms a primary diode laser into a powerful metal engraving machine.
H3: Essential Options from the AlgoLaser 1064nm Infrared Laser Module Alpha MK2 for United states Shoppers
Perfect for metal absorption. Engraves stainless steel, aluminum, brass, titanium, and copper immediately. No marking sprays desired.
High-quality laser place measurement will allow in-depth engravings, logos, textual content, and images on metal surfaces. Great for jewellery, resources, and industrial components.
The Alpha MK2 is created to mount on popular laser engraver frames from Ortur, AtomStack, Sculpfun, NEJE, and identical. Check out compatibility just before purchase.
Outside of metallic, engrave dark plastics, anodized aluminum, wood, leather-based, stone, and painted surfaces. Flexible for almost any workshop.
1064nm infrared mild is invisible. This needs suitable enclosure and safety glasses. AlgoLaser presents security recommendations and appropriate eyewear.
Wonderful-tune the laser electric power and focus length for different components. Accomplish substantial-distinction marks on gentle and dark surfaces.
H4: Understanding 1064nm Infrared Laser Technological know-how
Wavelength decides how a material interacts with laser light-weight. Blue diode lasers (445nm) are absorbed very well by Wooden, acrylic, and light-colored materials but are mirrored by shiny metals. The
H2: How to setup and Use the AlgoLaser 1064nm Infrared Laser Module Alpha MK2
Putting in the
H3: Set up Instructions
Examine compatibility: Assure your laser engraver's controller and electric power source can aid the infrared module. Most 12V or 24V diode laser controllers function. Examine the module's voltage and current requirements. Take away your present laser module: Unplug your latest blue laser module in the controller and energy offer.Mount the Alpha MK2: Connect the infrared module on your laser engraver's gantry utilizing the incorporated mounting brackets. Guarantee it truly is amount and protected. Hook up wiring: Hook up the module's PWM sign and ability wires on your controller and ability provide. Stick to the wiring diagram provided by AlgoLaser. Set concentration: Use the main target Software or measure the right distance with the laser lens to the material floor (typically all-around 40-60mm according to the module). Take a look at on scrap content: Before engraving your remaining piece, check on a scrap piece of exactly the same content to dial in electric power and pace settings.
If You aren't at ease with wiring, talk to a seasoned Pal or nearby maker Room for assist. Incorrect installation can destruction the module or your engraver.
H3: Appropriate Materials with the AlgoLaser 1064nm Infrared Module
The
Metals (direct marking): Stainless steel, aluminum, brass, titanium, copper, nickel, and several alloys.Anodized aluminum: Removes the anodized layer to expose bare aluminum (white/silver mark).Dim plastics: ABS, polycarbonate, and many engineering plastics. Coated metals: Powder-coated or painted metals (eliminates coating to expose bare steel).- Wood and leather-based: Can engrave, but blue lasers in many cases are additional efficient for these products.
Stone and glass: Limited final results; very best with CO2 or blue diode lasers.
Not all metals mark Similarly. Chrome steel presents the top superior-contrast darkish marks. Aluminum may well deliver a lighter gray mark. Brass and copper produce darkish marks but may perhaps need many passes. Usually examination 1st.
H3: Recommended Configurations for Typical Components
Configurations fluctuate depending on your distinct laser electricity (watts) and content. Start with these normal tips and change:
Chrome steel (dim mark): 80-a hundred% electricity, five hundred-a thousand mm/min pace, 1 move. - Aluminum (gentle mark): 70-90% ability, 800-1500 mm/min pace, one-two passes.
- Brass (dark mark): ninety-a hundred% electric power, four hundred-800 mm/min speed, one-2 passes.
- Anodized aluminum (white mark): 30-50% energy, 1000-2000 mm/min velocity, 1 pass.
Dim plastic: 20-40% power, five hundred-1000 mm/min velocity, one pass (be mindful to not melt).
Usually use LightBurn or LaserGRB application to control your laser. These programs allow for great-tuning of electricity and speed.
H4: Basic safety Precautions for 1064nm Infrared Lasers
The AlgoLaser 1064nm Infrared Laser Module Alpha MK2 emits invisible laser radiation. This is more perilous than noticeable lasers because you are unable to see the beam. Eye problems can take place instantly with no warning. Follow these security rules:
Use a totally enclosed laser engraver with interlocks. Never function the laser without the enclosure shut. - Dress in Qualified 1064nm laser safety glasses. Frequent sunglasses or blue laser glasses will never secure you. Purchase glasses exclusively rated for 1064nm wavelength with OD6+ defense.
Don't seem specifically at the laser or reflections. Shiny metal surfaces can reflect the beam. Use a matte surface or make certain reflections are contained. Set up a laser curtain or shield. When your engraver will not be thoroughly enclosed, insert Bodily obstacles throughout the perform location.Submit warning indicators. Notify Other people that an invisible laser is in use. Maintain unauthorized people absent. In no way go away the laser unattended when working. Fires can start In spite of metal engraving (particles can ignite).
Safety is non-negotiable. Infrared lasers are impressive instruments. Respect them.
H2: Who Can buy the AlgoLaser 1064nm Infrared Laser Module Alpha MK2?
The
H3: For Little Business people and Etsy Sellers
In the event you offer personalized steel products and solutions (keychains, Puppy tags, knives, applications, jewelry), the AlgoLaser 1064nm module means that you can engrave straight on steel devoid of costly fiber lasers. United states smaller entrepreneurs can provide steel engraving expert services, custom trophies, industrial element marking, and branded equipment. The return on investment is quickly since you can incorporate steel engraving on your products line without buying a $5000+ fiber laser.
H3: For Hobbyists and Makers
Do you're keen on making things? Engraving your styles on metal provides knowledgeable contact. The
H3: For Prototype Outlets and Engineering Teams
Prototyping often involves marking serial quantities, logos, or Guidelines on metal components. Sending components out for marking takes time and money. Using the AlgoLaser 1064nm module inside your shop, you are able to mark areas in-home in just minutes. For USA engineering groups, this speeds up progress and minimizes expenditures. The module is compact adequate to suit with a benchtop laser engraver.
H3: For all those By now Owning a Diode Laser Engraver
If you already have a diode laser (Ortur, AtomStack, Sculpfun, NEJE, and many others.), the AlgoLaser 1064nm module is an easy upgrade. You keep your current frame, controller, and ability supply. Just swap the module and start engraving metal. This is among the most Charge-effective approach to incorporate steel engraving ability on your present set up. For United states of america makers which have already invested inside a diode laser, this improve is actually a no-brainer.
H2: Specs on the AlgoLaser 1064nm Infrared Laser Module Alpha MK2
Here i will discuss the whole complex information to the
| Item Identify | AlgoLaser 1064nm Infrared Laser Module Alpha MK2 |
| Wavelength | 1064nm (Infrared, invisible) |
| Laser Energy | Varies by model (Test item listing for distinct wattage, typically 2W-10W optical electrical power) |
| Location Size | Great concentrate (0.08mm to 0.15mm standard) |
| Input Voltage | 12V or 24V DC (Examine specs) |
| Regulate Signal | PWM (TTL, 0-5V or 0-24V determined by controller) |
| Cooling | Passive heatsink + supporter (active cooling recommended for prolonged use) |
| Concentration Distance | Ordinarily 40-60mm (use furnished target Software) |
| Dimensions | Compact module (approx 60mm x 60mm x 80mm, varies) |
| Pounds | Approx three hundred-five hundred grams |
| Suitable Controllers | LightBurn appropriate controllers (LaserTree, Ortur, AtomStack, etcetera.) |
| Protection Course | Class 4 Laser Item (demands complete enclosure and safety eyewear) |
Closing Verdict: The |
BUY ALGOLASER 1064NM INFRARED LASER MODULE ALPHA MK2 NOW |
Upgrade your laser engraver and begin marking metal now. Buy your AlgoLaser 1064nm infrared module with quick shipping and delivery on the USA.
© 2026 On line Daraz — Innovative laser engraving engineering for United states of america makers. | Engrave metal with precision.
Disclaimer: Laser basic safety is crucial. This product or service emits invisible 1064nm infrared laser radiation. Use only with a fully enclosed laser engraver and Accredited 1064nm laser protection glasses (OD6+). Tend not to work without having good safety products. AlgoLaser is usually a trademark of its respective owner. This merchandise is for professional and knowledgeable people. Always check on scrap content to start with.